Watch this video and more on RealPars

Watch this video and more on RealPars

127. Assembly Line PLC Program – Part 2

Comparing Values in PLC Programming – 6m 36s

Up Next in Comparing Values in PLC Programming

  • 128. Assembly Line PLC Program – Part 3

    In the previous lesson I wrote a PLC program that I expect to work based on the first diagram. According to this diagram, when the start switch is pressed, motor 1 is going to turn on.

    When sensor 1 sees the parts, motor 1 is going to stop for a few seconds, and the jack will be active after ...

  • 129. Assembly Line PLC Program – Part 4

    In the previous lesson, I completed the PLC program for the first interruption caused by sensor 1 and tested it in the online mode as well to make sure that everything works within my expectations.

    As I promised in part 3 of this video series, I'm going to start writing the PLC program for th...

  • 130. Assembly Line PLC Program – Part 5

    In the previous lesson, I wrote a PLC program for the second interruption based on diagram 2. In this lesson, we're going to test the program in the online mode and then make the necessary changes to ensure that everything is working as we want it to.

2 Comments