Watch this video and more on RealPars

Watch this video and more on RealPars

118. Material Handling PLC program - Part 5

Comparing Values in PLC Programming • 2m 49s

Up Next in Comparing Values in PLC Programming

  • 119. Parking Lot Entrance Barrier PLC...

    In this lesson, I'm going to write a PLC program for a vehicle barrier at the parking entrance using a count up and down instruction and also two comparator instructions. What I need the vehicle barrier to do for me is, when the number of vehicles within the parking lot is equal to 500, it should...

  • 120. Parking Lot Entrance Barrier PLC...

    In the previous lesson I wrote a PLC program to control the vehicle barrier in a parking lot entrance and also counting the number of the vehicles within the parking lot.
    In this lesson I'm going to write a short piece of code for turning on the signal lamp when the parking lot capacity is full...

  • 121. Energizing a PLC Output When a G...

    In some projects you need a PLC output to be energized when a group of PLC inputs are all true at the same time. To write such a PLC program there are two ways:
    1. Writing the PLC program using what I call the "bit logic" approach
    2. Writing the PLC program Using the comparator operations
    In t...

12 Comments