Watch this video and more on RealPars

Watch this video and more on RealPars

119. Parking Lot Entrance Barrier PLC Program - Part 1

Comparing Values in PLC Programming – 7m 59s

Up Next in Comparing Values in PLC Programming

  • 120. Parking Lot Entrance Barrier PLC...

    In the previous lesson I wrote a PLC program to control the vehicle barrier in a parking lot entrance and also counting the number of the vehicles within the parking lot.
    In this lesson I'm going to write a short piece of code for turning on the signal lamp when the parking lot capacity is full...

  • 121. Energizing a PLC Output When a G...

    In some projects you need a PLC output to be energized when a group of PLC inputs are all true at the same time. To write such a PLC program there are two ways:
    1. Writing the PLC program using what I call the "bit logic" approach
    2. Writing the PLC program Using the comparator operations
    In t...

  • 122. Extended Timing in PLC Programs ...

    As you know, the maximum amount of time that you can use on S7 or SIMATIC timers for timing is 2 hours 46 seconds. If you need larger timing values, one of the options might be using the IEC timers.
    If you're not interested in using IEC timers, the other option is to build your own customized t...