Omron PLC Programming Basics - Sysmac Studio
This course is intended for beginners and will start off with the basics that everyone needs to know about PLCs and ladder logic instructions.
Identify and explain the purpose and operation of PLC hardware components Power Supply, CPU, Input/Output (I/O) modules
Explain how PLC hardware and modules connected
Explain the I/O slot numbering system
Demonstrate how to download and install Sysmac Studio
Explain the purpose and operation of basic ladder logic instructions Normally open contact , Normally closed contact ,Coil
Explain the operation of a simple ladder logic program
Configure a computer for Ethernet communication
Create a New Program and add I/O to an Omron NJ/NX-Series PLC
Establish an Ethernet communication link between a computer and an Omron N-Series PLC
Configure added I/O
1. Omron PLC Programming Basics - Introduction
2. What You Will Learn by Completing This Course
3. PLC Hardware Components
4. PLC I/O Modules
5. Basic PLC Instructions
6. A Simple One-Rung PLC Program
7. A Simple Two-Rung PLC Program
8. Sysmac Studio Download and Installation
9. Sysmac Studio Introduction
10. Start a New Project in Sysmac Studio
11. Configuring the Project
12. Reconfiguring the Project for a Different Controller
a complete beginner to PLCs and PLC programming and want to learn the basics
a PLC programmer who is experienced with other PLC programming software and now wants to learn how to navigate and use Sysmac Studio
Ted Mortenson
You'll get access to this course and ultimate access to the rest of the courses in the library.
- Software used : Sysmac Studio
- Equipment used: TBA
Yes. RealPars will issue a Certificate of Completion (certified by RealPars) when you complete the course.
Yes. Most people enroll individually, and then submit their receipt to their employer for reimbursement. However, if your employer has a tuition budget and wants to train 5 people or more, you can send us an email at hello@realpars.com and we will help you with bulk signup.
Of course. All of our course content is pre-recorded, so you can work and study on your own time.
Nope! All our courses are offered online, so you can take them from anywhere in the world. All you need is a high-speed internet connection and the applicable software for your course.