Industrial Robotic Systems with Fanuc Robots
Robots are continuing to reproduce faster than ever before. Robots are not here to replace people, but to replace the menial repetitive tasks people do. Some of these robots are yellow Fanuc Robots.
Identify a Fanuc robot
Identify Fanuc Controllers
Identify Applications for Fanuc Robots
Identify Different Robot Models
Understand Mechanical unit basics
Be able to Jog the Robot
Be able to Jog the Robot
Understand the need for batteries
Download Fanuc’s Simulator tool: Roboguide
Be able to install Roboguide and its various options
1. What is a 6-Axis Robot?
2. What is an End of Arm Tool (EOAT) in a Robot?
3. What is 6-axis Simulation Software?
4. Introduction to Fanuc Robot
5. How to Download Roboguide
6. Roboguide Installation
7. Create a New Robot with the Default HandlingPRO Config
8. Create a New Robot with the Last Used HandlingPRO Config
9. Create a Robot from a File Backup
10. Creating an Exact Copy of a Robot
11. What is Robot Mastering?
12. Resetting the Pulsecoder Alarm
13. Direct Entry Method
14. Zero Position Method
15. Quick Master
16. Single Axis Method
17. Coordinate Systems and Joint Systems
18. How to Move the Robot Using the Jog System
19. World Coordinate System
20. Tool, User, and Jog Frame Coordinate System
21. World Frame and Tool Frame
22. User Frame and Jog Frame
23. How to Add a Tool
24. Tool Frame Setup
25. User Frame Setup | Three-Point Method
26. User Frame Setup | Non-perpendicular User Frame
27. User Frame Setup | Four-point Method
28. Fanuc IO | Robot IOs
29. Fanuc IO | Digital, Analog, UOP, SOP
30. Fanuc IO | Group, Interconnect, Cell Interface
You are a PLC Programmer who wants to venture into robotics
You are a Maintenance Technician for Fanuc Robots
You want to learn about Fanuc Robots
Adam Greear
You'll get lifetime access to this course.
"Industrial Robotic Systems with Fanuc Robots" is a free course. No certificate will be granted for completing a free Fanuc Robots training course. However, You will receive a personalized certificate of completion once you have fully finished a course (that provides a certificate) while being a Pro member.
Software used:
Fanuc Robot or Roboguide software
Windows 10 PC
Equipment used:
Fanuc Robot with a teach pendant
Windows 10 PC
Yes. Most people enroll individually, and then submit their receipt to their employer for reimbursement. However, if your employer has a tuition budget and wants to train 5 people or more, you can send us an email at [email protected] and we will help you with bulk signup.
Of course. All of our course content is pre-recorded, so you can work and study on your own time.