Hi there
Now I'm Working with PLC S7-300 and Vision System cognex, I already have the configuration of communication with the vision sensor, but I have problem with sending and reciving date. I would like to help me with this problem!
Hi there
Now I'm Working with PLC S7-300 and Vision System cognex, I already have the configuration of communication with the vision sensor, but I have problem with sending and reciving date. I would like to help me with this problem!
Are you working with spreadsheet or easybuilder?
Hi there
First I tried to work with spreadsheet but I can't. only can to conect with easybuilder but I dont know how to see the directions for send a recive information. I would like to learn both.
It would be nice to give me some help.
I want to Know if this camera can to work wih PLC siemens how s7-1200?
First make sure that you don't have an error in the hardware settings of your plc. In spreadsheet you need to add input and output buffer functions on your spreadsheet plus two other functions that point to each buffer respectively i.e writeresultsbuffer and readinputbuffer. Something like that. In these functions you will have to configure the communication protocol being used plus other stuff. If you type in the insight help menu about the protocol you are using, you will get some important information including the setup.As for your PLC the 1200, well I don't know much about it. I am using CPU 317F with a profinet communication. If you drop an email I can send you some pictures about the whole setup for easy builder as well as the spreadsheet
Hi
my email is
[email protected]
Hi ulephiri543
I would like to know if you send me that picture abut easy builder as well as the spreadsheet
my email is [email protected]