Hi,

I'm using this program in my plant for loading 3 main pumps with different loading values from 0-100%. I'm trying to load the mw110 and mw112 in PLC simulation for above range but not able to do that.

Please can anybody explain this how it works and what am i missing.

Help will be much appreciated.

P1_FLOW Contain the address MW110

P2_FLOW Contain the address MW112

P3_FLOW Contain the address MW114

AN M 37.0

AN M 37.1

AN M 37.2

AN M 37.3

AN M 37.4

AN M 37.5

AN M 37.6

AN M 37.7

AN M 38.0

AN M 38.1

AN M 38.2

AN M 38.3

AN M 38.4

AN M 38.5

AN M 38.6

AN M 38.7

AN M 39.0

= M 53.0

AN M 650.3

AN M 650.4

AN M 650.5

JC M001

L 0

T MW 104

T MW 106

T MW 108

T "P1_FLOW" //MW110

T "P2_FLOW" // MW112

T "P3_FLOW" // MW114

M001: AN M 651.0

AN M 651.1

AN M 651.2

AN M 651.3

JC M002

L MW 108

T "P1_FLOW" // MW110

JU M004

M002: AN M 37.3

AN M 37.5

AN M 38.7

JC M003

L MW 104

T "P1_FLOW" // MW112

JU M004

M003: AN M 53.5

JC M004

L MW 106

T "P1_FLOW" // MW110

M004: L "P1_FLOW" // MW110

L 90

<=I

JC M005

L 100

T "P1_FLOW" // MW110

M005: L "P1_FLOW" // MW110

L 0

>=I

JC M006

L 0

T "P1_FLOW" // MW110

M006: NOP 0

AN M 37.1

AN M 37.6

AN M 37.7

AN M 39.0

JC M007

L MW 108

T "P2_FLOW" // MW112

JU M008

M007: AN M 37.3

AN M 37.4

AN M 38.7

JC M009

L MW 104

T "P2_FLOW" // MW112

JU M008

M009: AN M 38.5

JC M008

L MW 106

T "P2_FLOW" // MW112

M008: L "P2_FLOW" // MW112

L 100

<=I

JC M00a

L 100

T "P2_FLOW" // MW112

M00a: L "P2_FLOW" // MW112

L 0

>=I

JC M00b

L 0

T "P2_FLOW" // MW112

M00b: NOP 0

AN M 37.2

AN M 37.7

AN M 38.0

AN M 39.0

JC M00c

L MW 108

T "P3_FLOW" // MW114

JU M00d

M00c: AN M 37.4

AN M 37.5

AN M 38.7

JC M00e

L MW 104

T "P3_FLOW" // MW114

JU M00d

M00e: AN M 38.6

JC M00d

L MW 106

T "P3_FLOW" // MW114

M00d: L "P3_FLOW" // MW114

L 100

<=I

JC M00f

L 100

T "P3_FLOW" // MW114

M00f: L "P3_FLOW" // MW114

L 0

>=I

JC M010

L 0

T "P3_FLOW" // MW114

M010: NOP 0