In this video, you will learn how to create and modify the hardware configuration in “SIMATIC Manager”, by verifying the CPU configuration, setting the Profinet IP address, and adding a rack of “ET 200M” remote I/O.
These configurations define the addresses used for I/O, block transfers to and from Profibus devices sets node addresses, and specifies the possible interconnections between devices and nodes.
Once these configurations are completed and downloaded to the CPU, the CFC program and HMI graphics can be created.
In this video, we’ll complete the “Hardware” and “Network” Configurations. You will learn:
- How to download the hardware configuration to the AS
- How to configure a SIMATIC Workstation
- How to create, modify, and download the network configuration
In this video, you will learn:
• How to archive, or backup, the PCS7 project
• How to set up the first Continuous Function Chart for controlling the
process
In this video, you will learn:
- How to add libraries to the project
- How to configure the I/O cards to meet the project requirements
- How to add symbols to the hardware configuration
11 Comments