In this video, you will learn:
- How to add additional blocks to the CFC,
- How to interconnect blocks in the CFC,
- How to connect block parameters to hardware inputs and outputs.
A different block type is required for connecting to I/O in a CFC. For this purpose, you can refer to the PCS7 CFC programming manual. Here is the download link to this manual:
https://realpars.com/wp-content/uploads/2020/02/PCS7-Advanced-Process-Library-Manual.pdf
In this video, you will learn how to add a Process Template and to connect its blocks in the resulting CFC to the physical I/O points; We will add:
- A template as a CFC for Valve operation,
- A template as a CFC for Motor operation
In this lesson, you will learn:
- How to add an additional CFC from the Motor_Lean template for a Transfer Pump,
- How to make connections for the Motor block to its field I/O.
In this lesson, we will:
● make logical interconnections between CFC charts,
● configure an interlock based on the tank level for the valve,
● configure an interlock based on the valve position for the pump.
8 Comments