In this video I'm going to write a PLC program in STEP 7, create a relevant industrial application in Factory I/O from scratch and then connect the two software and test the PLC program in the 3D environment.
Factory I/O is an innovative software package that allows you to create graphics that represent the machinery that you wish to control and then test your PLC program with the graphics, in a 3D environment. This lesson demonstrates the different tools you will use to place and manipulate your grap...
Previously, we used the Factory I/O software package to create graphics that represent the machinery that we want control with a PLC program. This lesson will provide you with information on how to simulate the graphics environment with or without the use of the PLC program.
Factory I/O allows y...
In this lesson, we are going to learn how to connect our PLC program to the Factory I/O simulator. We will walk through the configuration process for connecting to a PLC or PLC simulator using the proper driver for our equipment. We will demonstrate how to associate our field devices, such as the...
6 Comments