Watch this video and more on RealPars

Watch this video and more on RealPars

149. Part Counting PLC Program Using Retro Reflective Sensors – Part 2

Getting Started with the Factory Simulation Software Called Factory I/O • 7m 25s

Up Next in Getting Started with the Factory Simulation Software Called Factory I/O

  • 150. Part Counting PLC Program Using ...

    Previously, we used the Factory I/O software package to create graphics that represent the machinery that we want control with a PLC program. This lesson will provide you with information on how to simulate the graphics environment with or without the use of the PLC program.
    Factory I/O allows y...

  • 151. Part Counting PLC Program Using ...

    In this lesson, we are going to learn how to connect our PLC program to the Factory I/O simulator. We will walk through the configuration process for connecting to a PLC or PLC simulator using the proper driver for our equipment. We will demonstrate how to associate our field devices, such as the...

  • 152. Part Counting PLC Program Using ...

    In this lesson, Factory I/O and our PLC program are now connected and we will start the factory simulation to see how our code checks out. We will discuss normally closed field devices and how they will function within our code. We will also discuss how the retro reflective sensor works and get i...

5 Comments