Next video will start in 30 seconds

105. Extended Timing in PLC Programs Using a Combination of a Timer and ...

Close Open

104. Extended Timing in PLC Programs Using a Combination of a Timer and Counter_ Part 1

How to Use Counters in PLC Programming – 5m 28s

Up Next in How to Use Counters in PLC Programming

  • 105. Extended Timing in PLC Programs ...

    The time value for the timer is currently 5 seconds and the counter value is 3. With these numbers, the fan should stay running for 5 seconds three times or 15 seconds. Now let's test the program one more time.

  • 106. Testing the PLC Program in Singl...

    Whether you’re testing a PLC program with an actual PLC or with a simulator, by default the CPU executes the program in continuous scan mode. However, the PLC simulator in STEP 7 is capable of executing the program in single scan mode as well.

    Now, you may be asking, “What is the difference b...

  • 107. Counter Bit Instructions in PLC ...

    Some of the most often used instructions in PLC programming are comparator operations. In all of the previous PLC programs that we have worked with so far, we have mostly worked with bits. A bit has only two possible values of one or zero, true or false and based on these limited values you can e...

2 Comments