Watch this video and more on RealPars

Watch this video and more on RealPars

102. How Many S7 Counters Can You Use in Your PLC Program?

How to Use Counters in PLC Programming – 3m 26s

Up Next in How to Use Counters in PLC Programming

  • 103. How to Prevent Counter Value Res...

    When you're using counters in your PLC program, if the PLC goes into the stop mode or the power cuts off, you'll lose all of the counter values and these values cannot be restored after running the PLC again.
    There are some programming tools and setups in the "STEP 7" that can be used to protec...

  • 104. Extended Timing in PLC Programs ...

    Previously, you learned that you can use S7 timers for the purpose timing in your programs. The maximum time value you can have for these timers is 2 hours and 46 minutes. But in some projects you may need longer time values. One way to increase the time value for timing is to use a combination o...

  • 105. Extended Timing in PLC Programs ...

    The time value for the timer is currently 5 seconds and the counter value is 3. With these numbers, the fan should stay running for 5 seconds three times or 15 seconds. Now let's test the program one more time.

9 Comments