Watch this video and more on RealPars

Watch this video and more on RealPars

134. An Introduction to Math Functions - Part 4

How to use Math Functions in PLC Programming • 5m 7s

Up Next in How to use Math Functions in PLC Programming

  • 135. Gas Turbine Temperature Control ...

    There are different applications across various industries where you need to measure and control the temperature of different factory sections. In this and then next lessons, you're going to learn how to write a PLC program using the math functions to measure a gas turbine gear box temperature an...

  • 136. Gas Turbine Temperature Control ...

    In the previous lesson, you learned that how the small portion of the alarm system for a gas turbine works. As I indicated, in this lesson I'm going to start writing a PLC program that will activate the alarms whenever the temperature measured by each sensor is out of range.

  • 137. Gas Turbine Temperature Control ...

    In the previous lesson, I wrote a PLC program for a gas turbine gear box that was able to calculate the sum of the temperatures measured by the RTD sensors and then provide me with the average temperature. In this lesson, I'm going to use this average temperature for writing code for activating t...

9 Comments