Watch this video and more on RealPars

Watch this video and more on RealPars

176. Turning on PLC Outputs in Sequential Order – Part 2

How to Use the Shift and Rotate Instructions in PLC Programming • 6m 16s

Up Next in How to Use the Shift and Rotate Instructions in PLC Programming

  • 177. Turning on PLC Outputs in Sequen...

    In a continuation of instruction training for the shift instruction located in the folder called shift and rotate, this lesson continues from the previous lesson where we had written some code but found that it didn’t quite function as we wanted. We pressed the S1 button and the first lamp turned...

  • 178. Turning on PLC Outputs in Sequen...

    In this lesson we continue working with the shift instruction located in the folder called shift and rotate. In the previous lesson we found a solution to our problem that was turning on the first lamp as we expected however, the remaining lamps turned on at once with the press of the S2 switch. ...

  • 179. Turning on PLC Outputs in Sequen...

    In the previous lesson we discussed how we can use the shift instruction to allow us to turn lamps on in sequential order. In continuation of that training this lesson will go into how we can use the shift right instruction to allow us to turn our lamps on in a different pattern. One useful appli...

8 Comments