Watch this video and more on RealPars

Watch this video and more on RealPars

Buy now Learn More

Already subscribed? Sign in

87. Using NO or NC Contacts in PLC Programming _ Part 2

PLC Progression - Level 3 (Lifetime Access) • 3m 29s

Up Next in PLC Progression - Level 3 (Lifetime Access)

  • 88.Single Start Switch PLC Program _ ...

    In previous lessons I wrote a PLC program for running the motor in both momentary and latched modes. In another lesson I wrote a PLC program to run and stop a heavy three phase motor and a fan with a single momentary switch. In the momentary program, there was only one switch that we could use as...

  • 89.Single Start Switch PLC Program _ ...

    In the previous lesson I added a parallel shortcut path to the program to be able to run the motor in the momentary mode but this didn’t help and the motor was still running in the latched mode when I pressed the switch. Now let’s see how I can modify current PLC program to be able to run the mot...

  • 90. Introduction to Counters in PLC P...

    In some industrial applications, you may need to count the number of products, cycles, the number of times a field device has been turned on and off, etc. Then you may need to use those numbers for another function within the PLC. For instance, you may need to count the number of bottles that are...

11 Comments