In the previous lesson I wrote a PLC program that I expect to work based on the first diagram. According to this diagram, when the start switch is pressed, motor 1 is going to turn on.
When sensor 1 sees the parts, motor 1 is going to stop for a few seconds, and the jack will be active after a 2 second delay.
When the jack is energized, after a 5 second delay, this timer is going to be true.
When the timer is true, the jack will be deactivated and motor 1 is going to run again.
Now I'm going to download the software to the simulator to see if it works as expected.